Home > Our Products > Calorimetry
Calorimetry
Calorimetry measures the heat of transformation of a material subjected to a temperature variation in a controlled atmosphere.
Various systems are available: isothermal, isoperibolic, adiabatic, reaction, titration, solution, drop, Calvet-3D Sensor Inside, etc.
Various systems are available: isothermal, isoperibolic, adiabatic, reaction, titration, solution, drop, Calvet-3D Sensor Inside, etc.
3D-Sensor Inside Calorimeters | ||
|
Reaction, isothermal and scanning calorimeter (ambient to 300°C)
Using SETARAM's exclusive Calvet 3D calorimetric sensor, the C80 calorimeter is one of the most powerful, yet flexible calorimeters available. See more |
|
|
Low Temperature Calorimeter (from -196°C to 200°C)
Using the SETARAM's exclusive Calvet 3D calorimetric sensor, the BT2.15 calorimeter offers in-situ low temperature calorimetric measurement possibilities on mixtures, solid or liquid interactions with liquid or gas. See more |
|
|
Very High Sensitivity Isothermal Calorimeter (ambient to 200°C)
Using SETARAM's exclusive Calvet 3D Sensor, the MS80 calorimeter is considered to be one the most sensitive calorimeter essentially used in isothermal mode. See more |
|
|
High Temperature Calvet Calorimeter (up to 800 / 1000°C)
The AlexSys is a high-sensitivity Calvet calorimeter optimized for high temperature solution calorimetry in molten solvents at temperatures to 1000 °C. The AlexSys is based on Prof. Alexandra Navrotsky’s (University of California - Davis) High Temperature Calorimeter which has many years of development, use, and application. See more |
|
|
Large-volume, High-Temperature DSC and (drop) calorimeter (ambient to 1600°C)
96 LINE is a line of modular high temperature (ambient to 2100°C) and large volume thermal analyzers (drop-calorimeter, calorimeter, DTA, DSC, TGA, TMA). The large sample volume has many advantages, providing possibilities such as: - Analysis of bulky, massive and non-dissociable samples (e.g. corrosion studies of mechanical parts, etc.). - Work on mixed materials (concrete core sample, etc.). - Detection of very small variations of mass with TGA (corrosion studies on sheet steel, etc.). See more |
|
|
TGA, DTA, DSC and Simultaneous TGA-DTA, TGA-DSC from ambient to 1600°C
- Coupling to gas analysis (FTIR, MS) - New 3D high-precision Cp sensor - Cp measurement within 2 % up to 1600 °C - Calisto software LABSYS evo offers TGA with simultaneous DTA or DSC and Cp measurement within the temperature range of ambient to 1 600 °C. The LABSYS evo features a NEW high performance top loading balance and a unique 3D high-precision (Calvet type) Cp rod. Thanks to its unique ergonomic design and market leading Calisto software the LABSYS evo offers you the most easy-to-use Thermal Analysis system with uncompromised performance. See more |
|
Reaction Calorimeters | ||
|
Calorimeter for screening synthesis reactions
Differential Reaction Calorimeters (DRC) are used in laboratories working on the optimization of industrial processes and the screening of chemical reactions. The DRC Evolution was developed jointly with the process safety laboratory of Sanofi-Aventis in Neuville-sur-Saône (France). See more |
|
|
Reaction Calorimetry
Depending on the results of the thermal screening tests, it is possible to study the reaction on the larger scale (~1litre) with the SIMULAR. Here the objective is to study the desired reaction and confirm the safety and operability of the process. SIMULAR is a computer controlled reaction calorimeter with features that allow all key reaction parameters to be reliably scaled, minimising the cost of pilot trials. Reactions are run exactly as they will be on the large scale and conditions are accurately reproduced. Power output released under these conditions is measured as the reaction is performed and the data can be put to a variety of uses. See more |
|
Adiabatic Calorimeters | ||
|
Adiabatic Calorimetry
The PHI-TEC system is a computer controlled adiabatic calorimeter designed to simulate the thermal behaviour of larger scale chemical reactors, especially when studying uncontrolled and run-away reactions. See more |
|
|
Adiabatic Reaction Calorimetry
The PHI-TEC I is a computer controlled adiabatic calorimeter that can be used to determin the heat evolved and pressure developed during an uncontrolled exothermic runaway reaction. It enables the user to understand what may happen during a worst case scenario arising from mal-operation. See more |
|
|
Battery Testing Calorimeter
The Phi-TEC is able to study : •Battery components (anode, cathode, electrolyte, SEI) •Complete batteries •Overcharged or over discharged battries •Charged, discharged and cycled batteries See more |
|
Thermal Screening | ||
|
Simple, rapid and reliable hazard assessment
The Thermal Screening Unit (TSu) has been developed for the first step in reaction hazards assessment, a more comprehensive solution than traditional screening by DSC/DTA . See more |
|
Register now
for full access to applicationlibrary,spare parts catalog and newletters
Contact us
Contact us
Our news
NEW PRODUCT: PCTPro E&E
A fully automated Sievert instrument for measuring Gas (CO2, CH4, C2H6, N2) Sorption properties of materials.
CO2 CAPTURE & SEQUESTRATION
Find out how our instrumentation is used to study CO2 Capture and Sequestration NEW PRODUCT
Introduction of a new autosampling option for LABSYS, market leading TGA, STA and TG-DSC
All news
Our agenda
- October 18, 2010 - October 22, 2010
MATERIAUX 2010
Nantes, FRANCE
Co-organized by more twenty learned societies, these events have been meeting opportunities between the national actors in the various fields of Materials Science.
For this 3rd edition, 14 symposiums are proposed whose:
- Civil engineering and Futur Habitat
- Energy Storage & Conversion
- Materials for Transport
- Materials & Environment
- Nanochemistry, Nanomatérials, Nanostructures
- Materials and Health Safety
- Thermodynamics and Materials for High Temperatures
- Mechanical properties and Spoiling
- Material stakes for the nuclear reactor (generation IV) - September 05, 2010 - September 08, 2010
MOF'S Conference
Marseille, FRANCE
This conference will follow the very successful 2008 conference that was held in Augsburg. The conference 2010 will be organized in Marseille at a central location overlooking the old port. The aims of MOF2010 are to address all questions concerning the community working with Metal Organic Frameworks, Metal Coordination Compounds and related materials. The spectrum of topics to be treated range from synthesis and characterization of new materials to properties of materials towards potential applications in biology/medicine, catalysis, magnetism, luminescence and sorption. Both experimental and theoretical aspects will be dealt with, along with key questions pertaining to potential industrial applications of this fascinating family of materials. - September 05, 2010 - September 10, 2010
SCTE 2010
Annecy, FRANCE
17th International Conference on Solid Compounds of Transition Elements
SCTE 2010 will be held in Annecy September, 5-10, 2010. The conference will be jointly organized by Institut Néel, CNRS-Université Joseph Fourier, Grenoble and Institut de Chimie de la Matière Condensée de Bordeaux, CNRS- Université Bordeaux 1, Bordeaux. - August 22, 2010 - August 27, 2010
ESTAC 10
Rotterdam, THE NETHERLANDS
Join us to this 10th European Symposium on Thermal Analysis and Calorimetry - August 15, 2010 - August 18, 2010
NATAS 38th Annual Conference
Houston Hall University of Pennsyvania,PA, USA
38th Annual Conference Exploring the Frontiers of Thermal Analysis, Calorimetry, and Rheology August 15 - 18, 2010 Houston Hall University of Pennsyvania
Short Course August 14 - 15, 2010 University of Pennsylvania - Philadelphia, PA 19104, USA
Useful Links